Render Renders, not photos: no printed sample has been photographed yet.
Glareshield Panels · Files v1.0 · for FlyByWire A32NX
A320 Overhead: ELEC + APU + HYD
Soldered build Not yet flown in the sim
A 3D-printable overhead: elec + apu + hyd for FlyByWire A32NX in MSFS, wired to a MobiFlight board you build yourself.
- Board
- Raspberry Pi Pico H
- Difficulty
- Intermediate (soldering ~28 joints, no extra chips)
- Print time
- 4.0 h plain · 4.0 h backlit
- Printer
- A Bambu Lab P1S or any printer with a 256 mm bed, a 0.4 mm nozzle, and an AMS (or manual colour changes) for 3 colours
Build it
-
Solderless not for this panel yet
At least one part here has no push-on version yet, so this panel is a soldered build for now.
-
Soldered
Intermediate (soldering ~28 joints, no extra chips). The wiring guide in the bundle walks through every joint, and the MobiFlight configuration is ready to load.
What's in the download
- Print files, plain and backlit (STL, STEP and a Bambu Studio project)
- The parts list with buy links and estimated prices
- The wiring guide and the MobiFlight configuration
- A 10-minute test checklist, the licence and a README
Parts and your estimated cost
| Core build | £9.50 |
|---|---|
| + Backlighting (optional) | +£8.00 |
| + Status lights (optional) BAT 1, BAT 2, APU MASTER, APU START, GEN 1, APU GEN, BUS TIE, EXT PWR, GEN 2, ENG 1 PUMP, BLUE ELEC, PTU, YELLOW ELEC, ENG 2 PUMP | +£4.28 |
| Everything | £21.78 |
Estimated parts cost for you, the builder: UK prices including VAT, single quantities; filament not included. You buy the parts from the suppliers you choose.
Main components (3)
| Qty | Component |
|---|---|
| 14 | Pushbutton, 19 mm square, momentary, printed legend cap (unlit) |
| 56 | Dupont crimp terminal + housing |
| 1 | Raspberry Pi Pico H (genuine, headers fitted) - pre-flashed with MobiFlight |
Wire, crimps and screws are in the full list in the bundle.