Glareshield Panels

Build guides

Solderless first: if a panel can be built without an iron, that guide comes first. Every bundle also has the soldered wiring guide and the MobiFlight configuration.

Solderless guides

• Avro RJ Radio Management Panel: solderless assembly · about 45 minutes, no soldering
• Avro RJ EFIS Control Panel Guide being written
• Avro RJ Door + Weather Radar Guide being written
• Avro RJ Dual ADF Controller Guide being written
• A320 Overhead (condensed, 1-build) Guide being written

Soldered build (every panel)

The soldered wiring guide ships in each bundle (wiring/): a board pin map and a picture-led wiring table, then the MobiFlight files to load (mobiflight/) and a 10-minute test checklist. Each panel page gives the joint count and difficulty.

Before you start

• Print on a 256 mm-bed printer with a 0.4 mm nozzle; face down, no supports. The Bambu P1S project is included.
• Low-voltage USB builds only: never connect to mains. Supervise children.
• Backlighting and status lights are optional: check your USB power budget before adding them.